What To Do If Your Water Heater Suddenly Stops Working
What To Do If Your Water Heater Suddenly Stops Working
Blog Article
What are your concepts about How to Troubleshoot and Repair an Electric Water Heater?
Several contemporary homes use an electric hot water heater for their heating system, as a result of its benefit and also ease of use. Nonetheless, much like any other electric devices, problems might arise with its use, unexpectedly. It can be truly frustrating to get up to a cold shower rather than a warm one or having your bath with water that isn't warm enough and even also warm. Whatever the situation may be, water heater troubles can be quite stressful. Fortunately, we've made a checklist of possible options to your hot water heater issues. There are a variety of variables that might trigger many of these problems, maybe a concern with the power supply, the electrical heating element, or the thermostat. Prior to doing anything, guarantee you turn off the primary power supply for security. Whatever the trouble is, getting it fixed ought to not present way too much of a concern if you follow these steps:
Call A Specialist:
If after changing all faulty parts as well as resetting your temperature level, the water heater still isn't working, you may require to speak to a specialist plumber for a professional opinion. The issue with your heating unit could be that the cold and hot faucets have been switched or it may be undersized for the quantity of warm water required in your house. Whatever the case may be, a professional plumber would assist fix the issue.
Examine Your Power Supply:
As standard as this might seem, it is very required. Without sufficient power, your water heater will not work. So the first thing to do when your water unexpectedly retires is to validate that it isn't a power trouble. Examine if the fuse is burnt out or the breaker stumbled. If the breaker is the concern, merely transform it on and off once more. Change any kind of busted or damaged fuse. Examine the device with power after these adjustments to see if it's currently functioning.
Examine Your Thermostat:
If your hot water heater still isn't functioning or the water appearing isn't warm sufficient, you might need to inspect the temperature settings on your upper thermostat. Ensure the circuit breaker is switched off prior to doing anything. Open up the accessibility panel and also press the red switch for temperature reset above the thermostat. This need to aid warm the water. Transform the breaker back on as well as inspect if the problem has been resolved.
Examine the Burner in the Hot Water Heater:
If it's not a power issue, then try having a look at your heating element if it is still functioning. Examine each of your burner to make sure the problem isn't with any of them. If any one of them is malfunctioning, change that part and then examine whether the hot water is back on.
Conclusion
Water heater troubles are not constantly major. A lot of them are due to small problems like a blown fuse or worn-out burner. Changing the defective parts need to work. Nevertheless, if you are still unable to address the issue, give a call to your closest plumber to come to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
As an avid person who reads on How to Troubleshoot and Repair an Electric Water Heater, I assumed sharing that piece of content was really helpful. Liked our post? Please share it. Let another person locate it. Many thanks for your time. Come back soon.
Get An Estimate
Report this page